Huawei SUN2000-10KTL-M0/M1 Small 3-Phase Inverter
3-phase inverter with 11.000VA4 Power
2 independent MPP trackers
1 battery connection (plug & play)
Efficiency up to 98.6%
Communication via WLAN & 4G*
RS485 for Smart Power Sensor & Battery
AC and DC overvoltage protection
Why you should choose a Huawei SUN2000-10KTL-M0
inverter from Huawei now.
The Huawei SUN2000-10KTL-M0 three-phase inverter is the interface for Huawei’s Smart Energy Center. Its dimensions of 525 x 470 x 166 mm (including mounting brackets) and weight of 17 kg are particularly impressive. The smart inverter includes a high-voltage battery connection with 800 volts. This allows for expansion with a Huawei battery. If you wish, you can connect the Huawei smart meter via the integrated interface. This allows you to get information about your own consumption and the feed-in to the public grid. It is also possible to dynamically reduce the power of your inverter. A particular advantage of the SUN2000-10KTL-M0 inverter is that it is supplied together with a WLAN dongle, which sends information to Huawei’s portal. The convection of this inverter works without a fan. It also has built-in surge protection and two independent MPP trackers. Especially convenient for you are the LED display and the web interface.
Installation is particularly easy due to the low weight and can be carried out quickly – even by just one technician. We always recommend having your inverter professionally installed by an electrician or other specialist. The SUN2000-10KTL-M0 inverter has a maximum efficiency of 98.6 percent. The European efficiency is 98.1 percent. In addition to the rated power of 10,000 watts, this inverter has a battery voltage range of 470 to 850 volts.
Huawei SUN2000-10KTL-M0 – General Specifications
Operating temperature range: -25 ~ +60 °C
Relative operating humidity: 0 % RH~100 % RH
Operating altitude: 0 – 4,000 m (derating > 3,000 m)
Cooling: Natural convection
Display: Status LEDs
Communication: RS485, WLAN, Ethernet, 4G/3G/2G*
Weight (incl. mounting bracket): 17 Kg
Dimensions (incl. mounting bracket): 525 x 470 x 166 mm
Protection class: IP65
Power consumption at night: < 5.5 W Huawei SUN2000-10KTL-M0 - Input DC Recommended maximum PV power: 14,880 Wp Max. Input voltage1: 1,100 V Operating voltage range2: 140 V ~ 980 V Starting voltage: 200 V Full MPPT voltage range: 470 V ~ 850 V Rated input voltage: 600 V Max. Max. input current per MPPT: 11 A Max. short-circuit current: 15 A Short circuit current: 15 A Number of MPP trackers: 2 Max. number of inputs per MPPT: 470 V ~ 850 V Number of inputs per MPPT: 1 Huawei SUN2000-10KTL-M0 - Output AC Mains connection: Three-phase Rated power: 10,000 W Maximum apparent power: 11,000 VA4 Rated output voltage: 220 Vac / 380 Vac, 230 Vac / 400 Vac AC - Mains frequency: 50 Hz / 60 Hz Maximum output current: 16.9 A Adjustable power factor: 0.8 cap. ... 0.8 ind. THD: ≤ 3% Huawei SUN2000-10KTL-M0 - Efficiency Max. Efficiency: 98.6 % European efficiency: 98.1 % Huawei SUN2000-10KTL-M0 - Protection devices DC load break switch: Yes Islanding detection: Yes DC reverse polarity protection: Yes Insulation monitoring: Yes Fault current monitoring: Yes AC overcurrent protection: Yes AC short-circuit protection: Yes DC overvoltage protection3: Yes AC overvoltage protection3Yes Arc detection: Yes Ripple control identifier inputs: Yes DC-MBUS communication to optimiser: No Huawei SUN2000-10KTL-M0 - Standards and Security EN/IEC 62109-1, EN/IEC 62109-2 Huawei SUN2000-10KTL-M0 - Power supply conditions G98, G99, EN 50438, EN 50549-1, CEI 0-21, VDE-AR-N-4105, AS 4777, C10/11, ABNT, UTE C15-712, RD 1699, TOR D4, IEC61727, IEC62116, DEWA Further information on conformity to standards is available on request. Huawei SUN2000-10KTL-M0 - included in delivery PV Connector Battery Connector AC Connector Signal Cable Connector Bracket WLAN-FE-Dongle